11-03-2009, 10:56 AM
|
|
Administrator
|
|
Join Date: Oct 2009
Posts: 5,409
|
|
Editing Inspection Setup Data Individually
Editing Inspection Setup Data Individually
Prerequisites
- You must have edited the QM-specific data in the Quality Management view of the material master.
- You can activate an
 inspection type under the following conditions:
- If it is not stock-relevant
- If it is stock-relevant and at least one active stock-relevant inspection type exists
- If it is the first stock-relevant inspection type and no inspection stock exists, or if you set the indicator Activate despite insp. stock
- When you deactivate the last inspection type relevant to stock, there must be no inspection stock for the material. To do this you must post the inspection lot quantities out of the inspection stock.
Procedure
- Choose Logistics ® Quality management ® Quality planning ® Logistics master data ®Material ®Inspection setup
- Choose Inspection setup, Individual processing.
- Select the materials you want to process. You can make the selection by using the plant, material, the material type and the material class.
- Edit the following indicators:
Indicator
| What You Should Know
| Activate despite insp. stock
| If you set this indicator, inspection lots are created automatically, when you activate the first stock-relevant inspection type, to avoid stock inconsistencies between QM and MM. The inspection type for the inspection lots to be created is taken from Customizing.
If you do not set this indicator, the inspection type for a material is only activated, if no stock inconsistencies will occur between QM and MM without the creation of additional inspection lots.
| Create change documents
| If you set this indicator, change documents are created for all changes that are made to the materials. You can display these change documents in the material master record.
If you want to distribute inspection setup data via ALE, using change documents, you must set this indicator. This ensures that all changes to the inspection setup are distributed in other systems.
|
- Choose Execute.
- From the list, select the material that you want to edit.
- Choose Edit inspection setup data.
The screen for editing the inspection setup appears.
- Make the required changes.
- Save your data.
Additional Functions in the Selection List for Mass Change
Function
| Push****on
| What You Should Know
| Display inspection setup
| Display inspection setup
| You switch to the inspection setup in the Quality Management view of the material master.
| Display stock overview
| Stock
| You switch to the stock overview for the chosen material.
|
Last edited by seema; 11-03-2009 at 10:57 AM.
|
