#1
|
|||
|
|||
Creating a Sampling Procedure
Creating a Sampling Procedure
You can use an existing sampling procedure as a copy model. To do this, choose Sampling procedure ® Copy. Then enter the name of the sampling procedure you want to copy and choose Copy. The system displays the assignments screen with the copied data, which you can change, if necessary.
If you want to work with independent or dependent multiple samples, you enter an additional valuation rule that combines the characteristic valuations for individual samples as a collective valuation, and the required number of samples (only for independent multiple samples). If only one valid valuation rule was defined in Customizing, the system proposes this valuation rule automatically. Dependent multiple samples are only possible if you specified the sampling type Use sampling scheme.
If you chose a fixed sample and a variable inspection for the valuation mode, enter the sample size and the k-factor. If you chose a fixed sample without valuation parameters, enter the sample size. If you chose a fixed sample and an attributive inspection for the valuation mode, enter the sample size and the acceptance number. If you chose a fixed sample without valuation parameters, enter the sample size. If you set the Free inspection points indicator on the assignments screen, you must also enter the inspection frequency. For example, you have activated quantity- based inspection points and want to inspect after each 300 pieces. If you enter the inspection frequency 2 in the sampling procedure for a characteristic, you must carry out an inspection after every second inspection point. The sampling procedure for the next characteristic may require an inspection for each inspection point.
maintaining allowed relationships and sampling procedures and dynamic modification rules. Using this function, you define which combinations of sampling procedures and dynamic modification rules are compatible and can be used together in an inspection plan or for an inspection type (for sample determination and/or dynamic modification without a task list). If you do not include the sampling procedure in the allowed relationships table, the system returns you to the initial screen and confirms that the sampling procedure was created. Maintaining Sampling Procedure for Control Charts Last edited by seema; 11-03-2009 at 10:28 AM. |